160 Grab Bar — Rear Mounting
Tubing 18 gauge and flanges 1⁄8“ (3 mm) thick stainless steel type 304 with satin finish. Closure plate is 1⁄8" (3 mm) thick. All welded construction. Unit has 3 Threaded Rods in Welded Studs on each flange for rear mounting.
162 Grab Bar — Front Mounting
Tubing 18 gauge and flanges 1⁄8“ (3 mm) thick stainless steel type 304 with satin finish. Closure plate is 1⁄8" (3 mm) thick. All welded construction. Unit has 3 holes through each flange for front mounting.
Click on Product Picture
170 Retractable Shower Seat —
Front Mounting
Seat folds up into cabinet, both fabricated of
16 gauge stainless steel, exposed surfaces
have a satin finish.
Seat has reinforced
channels. Wall sub frame furnished,
with welded on
masonry anchors. Sub Frame Opening:
15 " x 15 " x 2 3⁄4"
(380 x 380 x 70 mm).
Click on Product Picture
110 Recessed Toilet Paper Holder — Rear Mounting
Fabricated of 16 gauge type 304 stainless steel, satin finish exterior, glass blasted satin finish interior. 4 1⁄2" (115 mm) interior depth accommodates one standard toilet paper roll. Hidden contraband causes roll to project from holder allowing detection. Two “T" nuts welded on back for rear mounting. Wall Opening: 5 3⁄4" (145 mm) diameter x
wall thickness. Overall Size:
7 1⁄4” (185 mm) diameter.
Click on Product Picture
110-1 Square Recessed Toilet Paper Holder — Rear Mounting Fabricated of 14 gauge type 304 stainless steel with satin finish exterior, glass blasted satin finish interior 4 1⁄2" (115 mm) deep accommodates one standard toilet paper roll. Flange is 7" (180 mm) square. Hidden contraband causes roll to project from holder allowing detection. Two “T" nuts welded on back for rear mounting. Wall Opening: 5 1⁄2" (140 mm) diameter x wall thickness. Overall Size: 7" x 7” (180 x 180 mm).
Click on Product Picture
140 Rear Mounting
Recessed
Soap Dish
Soap dish 16 gauge stainless steel type 304 with satin finish. One piece drawn construction with beveled trim and embossments for air circulation and drainage. Unit has two “T" nuts welded on back for rear mounting. Wall Opening:
6 1⁄2" x 5" (165 x 130 mm) wall thickness. Overall Size:
7 3⁄8” x 6” (215 x 155 mm).
Click on Product Picture
111 Front Mounting
POST Type Surface Mounted Toilet Paper Holder
Fabricated of 18 gauge 11⁄4" (32 mm) OD stainless steel type 304 with satin finish. Flange is 3" (76 mm) dia x 1⁄8 " (3 mm) thick and has
3 countersunk holes for front mounting. Overall Size:
4 1⁄2" x 3 3⁄4" (115 x 95 mm) projection.
