GO TO PAGE : < 1 2
  
     
 
Click on Product Picture
127
Clothes/Towel Hook Strip — Front Mounting
Wall plate 14-gauge with beveled edges, 11-gauge brackets, and 4, 7-gauge hooks. Stainless steel type 304 with satin finish. Hooks snap down for safety if excessively loaded. Unit has 6 mounting holes through back for front mounting.
Overall Size:
11" x 51⁄2" x 3 1⁄8" (280 x 140 x 80 mm) projection.
Click on Product Picture
129
Clothes/Towel Hook Strip — Front Mounting
Fabricated of 12 gauge stainless steel type 304 with satin finish. Back plate of 14 gauge stainless steel. Hooks snap down for safety if excessively loaded. Six holes through back for front mounting.
Overall Size:
18" long x 5 1⁄2" x 2 1⁄8" (460 x 140 x 55 mm) projection.
Click on Product Picture
122
Square Clothes Hook — Rear Mounting
Constructed of 12 gauge stainless steel type 304L with a No. 4 finish. Back plate is fabricated of 14 gauge stainless steel. If hook is excessively loaded, it will snap down for safety. Unit has four studs welded on back for rear mounting.
Overall Size:
4 1⁄4" x 4 1⁄4" x 2 1⁄8"
(110 x 110 x 55 mm).

123
Square Clothes Hook — Front Mounting
(Not Shown) Similar to 122, except with four holes for front mounting.

Click on Product Picture
130
Recessed Shelf — Rear Mounting
Shelf 16 gauge stainless steel type 304L, corners welded and ground smooth. 1" (25 mm) wide beveled No. 4 satin finish trim. Interior glass blasted satin finish. Unit has four studs welded on back for rear mounting.
Wall Opening:
16 1⁄2" x 5 1⁄2" (420 x 140 mm) x wall thickness.
Click on Product Picture
128-1
Book Shelf/Clothes Hook — Front Mounting
Shelf and back plate are 14 gauge stainless steel type 304 with satin finish. Hooks are 12 gauge stainless steel and back plate is 14 gauge stainless steel. Seams are welded and ground smooth. Hooks snap down for safety if excessively loaded. Unit has 6 holes through back for front mounting.
Overall Size:
18" x 11" x 8" (460 x 280 x 200 mm).
Click on Product Picture
137
Book Shelf/Clothes Hook Strip — Front Mounting
Book shelf and back plate are fabricated of 14 gauge stainless steel type 304 with satin finish. Hooks are 7 gauge and brackets are 11 gauge stainless steel. Hooks snap down for safety if excessively loaded. Unit has 6 holes through back for front mounting.
Overall Size:
18" long x 11" high x 8" deep (460 x 280 x 200 mm).
 
     
 

Click on Product Picture

120
Clothes Hook — Front Mounting
Bracket 11 gauge, hook 7 gauge type 304 stainless steel with satin finish. If hook is excessively loaded, it will snap down for safety. Unit has four holes through flange for front mounting.
Overall Size:
3" x 5" x 3 1⁄16" (75 x 130 x 80 mm) projection.

121 (Not Shown)
Clothes Hook — Rear Mounting
Similar to 120, but with four studs welded to back for rear mounting.

Click on Product Picture

117
Folded Toilet Tissue Holder — Front Mounting
Holder is 14 gauge type 304 stainless steel, satin finish. Open design for detection of contraband. Provided with 4 mounting holes for front mounting.
Overall Size:
4 3⁄4" x 9" x 2 3⁄4" (120 x 230 x 70 mm).
 
     
GO TO PAGE : < 1 2
 

AMERICAN SPECIALTIES INC.
441 Saw Mill River Road
Yonkers, NY  10701-4913
914.476.9000 | Fax 914.476.0688
CONTACT US: info@americanspecialties.com