GRAB BARS
FEATURES
- In compliance with strength requirements of ADA guidelines
- Bars fabricated of satin finish 18 Gauge type 304 stainless steel tubing. Available peened or smooth
- Mandrell bending process ensures uniform bar diameters
- Heliarc welding forms a single Structural unit
GRAB BAR CONFIGURATIONS
click here to download Grab Bar configurations
The standard shapes are typical configurations.Grab bars can be custom designed and manufactured to meet any specific architectural requirement.
Designers Note: For a non-slip surface, specify suffix “P” (peened). When specifying grab bars insert the configuration type numbers listed on pages 40 and 41 into the double zeros at the end of the grab bar series number.
Example 1: A 1 1/2” (38 mm) concealed 18” x 33” (460 x 840 mm) horizontal grab bar has a model number — 3274. When a special size is needed add suffix “M” plus the size, to the closest standard bars.
Example 2: A 1 1/2” (38 mm) concealed 23” x 37” (585 x 940 mm) horizontal grab bar has a model number 3274-M2337.
1 1/4" (32 mm) O.D.
-
Flange is 3" (76 mm) diameter, 1/2" (13 mm) deep, 11 gauge type 304 stainless steel with satin finish.
- Tenon plate is 13 gauge with slotted srew holes.
- Flange is secured to concealed tenon plate with 3 stainless steel allen head screws.
-
Flange is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel with a satin finish.
-
Exposed mounting screw holes are drilled and countersunk.
- Flange is 3" (76 mm) diameter, 1/8" (3 mm) thick type 304 stainless steel with a satin finish.
- Exposed mounting screw holes are drilled and countersunk.
1 1/4" (32 mm) O.D.
- Cover snaps over mounting flange dimples to conceal screws.
-
Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and three locking dimples adn is 1/8" (3 mm) thick, type 304 thick stainless steel.
- cover is type 304 stainless steel with satin finish, 22 gauge, 3 3/16" (81 mm) diameter.
1 1/2" (38 mm) O.D.
-
Cover snaps over mounting flange dimples to conceal screws.
- Concealed mounting flange is 3 1/8" (79 mm) O.D. diameter with two screw holes and three locking dimples adn is 1/8" (3 mm) thick, type 304 thick stainless steel.
- Cover is type 304 stainless steel with satin finish, 22 gauge, 3 3/16" (81 mm) diameter.
