TELEPHONE ENCLOSURES
ASI Telephone Enclosures offer the designer many options to satisfy the most exacting project requirements. All enclosures are manufactured to conform with standard telephone company practice, in aspects that include security, mounting and installation. ASI brings more than 40 years of experience in architectural metal specialties along with state-of-the art equipment to every project.
TELLETTE 1305 COLLECTION
Wing panels of unit shall be 16 gauge stainless steel and have industrial carpet on inside for sound control. Back panel and shelf shall be stainless steel with No. 4 satin finish. Mounting bracket shall have pre-drilled mounting holes.
Divider Options:
01 Stainless Steel #4 Satin Finish Back and Side Wings
02 Perforated Stainless Steel Back and Side Wings
03 Phenolic Side Wings (Gray)
04 Acrylic Wings (C= Clear; B= Bronze)
08 Perforated Stainless Steel Back
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Receiver Plate
12 Sloped Shelf
13 Directory Holder Shelf - add 6” to height
14 Swing-Up Directory
15 Directory Binder and Chain-For Use With Option 13
16 Light Module
17 Multiple Units with Common Divider - Specify Number in Each Group
Divider Options:
01 Stainless Steel #4 Satin Finish Back and Side Wings
02 Perforated Stainless Steel Back and Side Wings
03 Phenolic Side Wings (Gray)
04 Acrylic Wings (C= Clear; B= Bronze)
08 Perforated Stainless Steel Back
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Receiver Plate
12 Sloped Shelf
13 Directory Holder Shelf - add 6” to height
14 Swing-Up Directory
15 Directory Binder and Chain-For Use With Option 13
16 Light Module
17 Multiple Units with Common Divider - Specify Number in Each Group
TELLETTE 1350 COLLECTION
Wing panels, shelf and directory holder shall be 16 gauge stainless steel. Back panel shall be 18 gauge stainless steel with No. 4 satin finish. Mounting bracket shall have pre-drilled mounting holes.
Divider Options:
02 Perforated Stainless Steel Back and Side Wings
03 Phenolic Side Wings (Gray)
06 Carpet Inside; Stainless Steel Outside
07 Acrylic Wings (C= Clear; B= Bronze)
08 Perforated Stainless Steel Back
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Undershelf Holder
13 Directory Holder Shelf - add 6” to height
14 Swing-Up Directory
15 Directory Binder and Chain-For Use With Option 13
16 Light Module - Add 6” to Height
17 Multiple Units with Common Divider - Specify Number in Each Group
24 Coin Slot and Return Opposite Side with Cable Thru Door
Divider Options:
02 Perforated Stainless Steel Back and Side Wings
03 Phenolic Side Wings (Gray)
06 Carpet Inside; Stainless Steel Outside
07 Acrylic Wings (C= Clear; B= Bronze)
08 Perforated Stainless Steel Back
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Undershelf Holder
13 Directory Holder Shelf - add 6” to height
14 Swing-Up Directory
15 Directory Binder and Chain-For Use With Option 13
16 Light Module - Add 6” to Height
17 Multiple Units with Common Divider - Specify Number in Each Group
24 Coin Slot and Return Opposite Side with Cable Thru Door
TELLETTE 1450 COLLECTION
Unit shall be 18 gauge stainless steel with No. 4 satin finish on all exposed surfaces. Recessed mounting box shall be 16 gauge steel with black baked enamel finish and pre-drilled mounting holes. Receiver cord through face plate.
Functional Options:
15 Directory Binder And Chain-For Use With Option 20
19 TDD Recessed Shelf- Add 6” to Height
20 Recessed Directory Shelf-Add 6” to Height
24 Coin Slot and Return Opposite Side with Cable Thru Door
Functional Options:
15 Directory Binder And Chain-For Use With Option 20
19 TDD Recessed Shelf- Add 6” to Height
20 Recessed Directory Shelf-Add 6” to Height
24 Coin Slot and Return Opposite Side with Cable Thru Door
TELLETTE 1550 COLLECTION
Curved unit shall be all type 304 steel with No. 4 satin finish on all exposed surfaces. Outer wrap shall be 1/8” thick, perforated interior shall be 22 gauge and shelf shall be 16 gauge. Unit shall have acoustical insulation between perforated interior and wrap for sound control.
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Undershelf Holder
12 Swing-up Directory
15 Directory Binder and Chain-For Use With Option 22
18 Multiple Units
21 Sloped Shelf- add 4” to Height
22 Directory Holder Shelf - add 6” to height
23 Light Module
24 Coin Slot and Return Opposite Side with Cable Thru Door
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Undershelf Holder
12 Swing-up Directory
15 Directory Binder and Chain-For Use With Option 22
18 Multiple Units
21 Sloped Shelf- add 4” to Height
22 Directory Holder Shelf - add 6” to height
23 Light Module
24 Coin Slot and Return Opposite Side with Cable Thru Door
TELLETTE 1600 COLLECTION
Curved unit shall be all type 304 steel with No. 4 satin finish on all exposed surfaces. Outer wrap shall be 1/8” thick, perforated interior shall be 22 gauge and shelf shall be 16 gauge. Unit shall have acoustical insulation between perforated interior and wrap for sound control.
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Undershelf Holder
12 Swing-up Directory
15 Directory Binder and Chain-For Use With Option 22
18 Multiple Units
21 Sloped Shelf- add 4” to Height
22 Directory Holder Shelf - add 6” to height
23 Light Module
Functional Options:
10 ADA Front Reach - 30” Inside Clearance, 48” Coin Slot Height
11 TDD Undershelf Holder
12 Swing-up Directory
15 Directory Binder and Chain-For Use With Option 22
18 Multiple Units
21 Sloped Shelf- add 4” to Height
22 Directory Holder Shelf - add 6” to height
23 Light Module
QUICK-REF DIRECTORY SHELF
Directory shelf shall be 16 gauge stainless steel and designed so that binders can be changed independently. Binder covers shall be Mylar with stainless steel hinges. Unit shall accommodate from 3 to 7 binders. When ordering, specify number of binders (e.g., 1700-3). Overall size is for 1700-3; Add 3 3/4” to width for each additional binder.
